• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You might need the key fob to be programmed by an auto locksmith or replacement subaru key dealer, depending on how old your Subaru is. This is accomplished by connecting a computer-based programming machine to your vehicle.

To program your Subaru begin by opening the driver's door using the door button control, and then close it. You will hear a chime from the instrument panel and the dome lights will light up.

Step 1: Find the Transmitter Circuit Board

There are a variety of ways to program your key fob. First, you must know which kind of key fob you own. You can do this by looking at the shape of the key fob, or by listening to the car's chime.

Once you have the details you need, you can begin the process of programming your keyfob home. To accomplish this, you'll require a metal key and a screwdriver with a flat head. Open the key fob by twisting it. Push the metal key into the case. Then let go of the battery by pressing the tabs holding it in place. Replace the battery and put the case back together.

Step 2 Step 2: Unscrew your Key Fob Case

It is an ideal idea to change the batteries in key fobs in case they're not working. However, there are instances where the buttons on the key fob might be damaged. If you can see that the metal contacts on the button have become loose then you can try applying solder back to them to ensure that they function properly.

Be sure to turn off your ignition and close your doors prior to you begin. You can do this by closing the driver's door and pressing your door button ten times in rapid sequence. You'll then hear the instrument panel chime, and your dome light will flash. This indicates that you're prepared to move forward.

Step 3: Insert the fob for the key into the ignition

Many websites will tell you how to program your brand new or Replacement subaru Key Subaru keyfob at home. But, the majority of them do not provide very specific instructions. Reprogramming an electronic lock is best done by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your subaru car keys replacement with the engine turned off and all doors shut. Use the door button control and use it to unlock all doors. Open and close the driver’s door a second time. Then, remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system should sound chirps to confirm that the settings have been modified.

Step 4: Turn on the ignition

Before you begin this process of programming a key fob, it is important to keep in mind that this process only works in the event that you already have a functioning key already. If you don't, a dealership or auto-locksmith will be required to program a key for your Subaru Fort Bliss.

Once your key is programmed, you should be able start your car in less than five seconds. Begin by closing the doors and then shutting off the engine. Next, get in the driver's seat and unlock all doors with the door button control. Place the key into the ignition then turn it on to the off position (the electrical systems will turn on, but the engine is off) then turn it back to the off position ten times in quick succession.

Step 5 Step 5: Lock the Door of the Driver's Door

subaru outback replacement key provides a variety of premium vehicles with key fobs that lock and unlock doors, start the engine, and even defrost windows. However, sometimes, replacement subaru key these devices aren't working as they should.

To fix this problem to fix it, you must contact an auto locksmith or dealer. This will fix the issue and ensure that your vehicle is secure.

You must first open and close the driver's side door. Put the key in the ignition, Replacement Subaru Key and turn it to position 1. Then, reverse it to the off position. Perform this as fast as you can for ten times. After the tenth time, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock button on the driver's Door

The process to replace a battery in the Subaru remote key fob is very simple. Open the exterior fob case. Then you can use the flathead screwdriver open the interior case and then remove the battery.

After removing the old battery, replace it with the new one and close the case. Then, sit in the driver's seated position and unlock all the doors using the door button control. Put the key in the ignition and turn the key so that the electrical system is switched on, but the engine is off. Repeat this 10 times until you hear a chime sound on the instrument panel. This will put the system into programming mode.

Step 7: Press the Passenger Door Lock/Unlock button

For some owners, the annoying sound heard when locking or unlocking a Subaru key fob from outside the vehicle can be distracting. In certain instances you can turn off the sound by shutting and opening all doors by double-clicking on the lock button on the key fob.

Switch off the ignition and close all doors, as well as the fuel-filler lid. For 10 seconds you need to press and hold the lock button on the key fob. The instrument panel emits a chime after this is done. The chime signifies that the fuel-filler lid and door lid are locked. It is possible to alter the setting so that the doors lock automatically and without pressing a button.

Step 8: Enter the 8-Digit Transmission Number

Note down the initial series of 8 digits and keep it handy. Now, get in your driver's seat, close all the doors and turn the ignition to the first position (towards on). After ten turns your instrument panel should begin to sound once.

Next, open the case for the key fob and locate the circuit board that controls the transmitter. The circuit board should contain one or two numbers with 8 digits. Take note of the first number sequence and follow the instructions in this guide to register the code with your vehicle's system. For older models, this process might require a visit to the dealer.